Loop backs
connect input to ouput to test I/O loop.
-
Product
8 Connector-Hole Back Extension
9401-BE
-
Semi-enclosed version of the cabling "doghouse" for the Hawk/PC chassis with rear panel punched to accommodate 8 50/37 pin d-sub connectors. Space is provided to mount the standard DG-style 100 pin edge connector paddles.
-
Product
Push Back Probes (VF4) VF416B140G25
1005232
-
The Push Back Probes (VF4) VF416B140G25, with order code 1005232, is designed as a basic contact probe that excels in various applications, ensuring reliable connectivity in electronic testing environments. This probe operates within a temperature range of -45°C to +100°C and features a pitch of 4.00 mm (157 mil). With a robust design, it is capable of handling a continuous current of 10A while maintaining a typical contact resistance of just 30 mOhm, making it a reliable component for precision measurements.
-
Product
Push Back Probes (VF4) VF422B0001G15
1022238
-
The Push Back Probes (VF4) model VF422B0001G15 is engineered for precision in challenging temperature environments, with a remarkable operating range from -45°C to +100°C. This basic contact probe features an optimized pitch of 4.00 mm, ensuring effective electrical connectivity in various applications. Its design is tailored for rigorous use, exemplified by a continuous current rating of 10A and a low typical contact resistance of just 30 mOhm, making it ideal for high-performance settings where reliability and performance are paramount.
-
Product
PXI Analog Output/Current Loop Simulator Module - 8 Channel
41-765-003
Analog Output Module
The 41/43-765-003 is an 8-channel Analog Output Module designed to meet the requirements of industrial control applications utilizing current loops 4 – 20mA. It consists of up to four 16-bit, digital-to-analogue converters (DAC), capable of creating four current outputs each. Output current within 0mA - 4mA and 20mA - 24mA, give the ability to simulate error or extra signaling conditions. The ±24mA mode gives the ability to simulate either sourcing or sinking sensor.
-
Product
Surge Suppressor to Suppress SCR Spikes from Customer Equipment Going Back to Utility Power, P/N 5965C
-
This Suppressor Board is ideal for SCR Controlled Power Supplies when SCR control is on the primary side.The Suppressor Board will prevent SCR spikes to go back into the 480 VAC utility power lines.
-
Product
Current Loop Supply Isolating Transmitter
Model TWS / TWS 2
-
Kusam Electrical Industries Limited
• Aux. Power AC 85 ~ 265V or DC 85 ~ 300V• High Accuracy 0.1% RO at 23 °C ± 5 °C• Output User Selectable• PC Plastic Case, DIN Rail or Wall Mounting• High Dielectric Strength (AC 1.5KV/Min, between Input / Output / Power)
-
Product
Push Back Probes (VF4) VF406B300G25
1002332
-
The Push Back Probes (VF4) VF406B300G25 is a precision contact probe designed for a variety of applications demanding high reliability and accuracy. With a length of 69.70 mm and a projection height of 34.80 mm, this probe is adept at handling temperatures ranging from -45°C to +100°C, making it suitable for challenging environments. Its sturdy construction, featuring a beryllium copper plunger with gold plating, ensures excellent conductivity and durability, while the brass barrel also plated with gold provides longevity and reduced wear during operation.
-
Product
Push Back Probes (VF4) HVF4DS-20
1015636
-
The Push Back Probes (VF4) HVF4DS-20 is designed as the ideal solution for a variety of applications, offering reliable performance and precise measurements. With a pitch of 4.0 mm and a total length of 2.00 mm, these probes are engineered for versatility while ensuring that they can accommodate different setups with ease. The outer diameter of 3.60 mm makes them compact yet effective, allowing for seamless integration in tight spaces.
-
Product
Loop Calibrator
6500 LC
-
Standard Electric Works Co., Ltd
● 4-20mA (1kΩ load, 24V Loop Supply).● 0.025% Basic Accuracy.● Simple Operation Interface.● Auto Ramp and Step Functions.● 0-20mA, 0-24mA selectable.● Incremental percentage setting : 0-100%.● Warning beeper when output is open.● 0-24V output.● The minimum load of 20kΩ on voltage mode.
-
Product
30" Front to Back Stiffeners
FB-30
-
Additional aluminum extruded front-to-back stiffeners are available for Vertical Cabinets. Includes installation hardware
-
Product
Push Back Probes (VF3) VF383B0003G15
1005897
-
The Push Back Probes (VF3) VF383B0003G15 are expertly designed contact probes optimized for precision and reliability in various applications. With a pitch of 3.00 mm, they ensure smooth and effective connectivity within electronic circuits, capable of operating in extreme temperatures ranging from -45°C to +100°C. This model supports continuous current up to 8.00 A, maintaining a low typical contact resistance of just 30.00 mOhm, which is crucial for ensuring optimal performance and longevity.
-
Product
Helmholtz Coils / Radiating Loops
-
Formed by a pair of conducting circular coils with many turns, each carrying a current. The coils are separated by a distance equal to the radius of the circular loops.
-
Product
Antenna, Active Loop
EM-6876 | 9 KHz – 30 MHz
-
The Electro-Metrics EM-6876 Active Loop Antenna is used with EMI Receivers and Spectrum Analyzers with 50 ohm input and covers the frequency range of 9 kHz to 30 MHz.
-
Product
Push Back Probes (VF4) VF416B100G15
1009923
-
The Push Back Probes (VF4) VF416B100G15, with order code 1009923, are a critical component designed for precision in various applications. Engineered as basic contact probes, these VF4 models exhibit a pitch of 4.00 mm, enabling effective connectivity while operating within a temperature range of -45°C to +100°C. The probes are built to withstand demanding environments, providing reliability and durability essential for high-performance tasks.
-
Product
Slotted And Loop Types
-
As a practical alternative to wire-wrap posts and turret terminals, loop and slotted test points are an economical choice for reliable test terminations. Allowing non-slip, safe circuit testing, terminals easily attach to J hooks, EZ hooks, grabbers, alligator clips, tips or probes. Space saving, ultra-low and low profile designs are available for high density PCB applications. High profile designs are also offered for difficult to reach applications.
-
Product
Saicheng Adhesive Loop Tack Tester
-
VOC-01 Loop Tack Tester is applicable to measure the tack property of adhesive tapes, pressure-sensitive adhesives (PSA), and adhesive materials according to ASTM D6195.
-
Product
THREE WAY BACK PRESSURE KIT
TU24APB
-
*Allows quicker and more accurate testing of exhaust blockages in catalytic converters, mufflers, etc*2-1/2" gauge features two multi-colored bands - idle and 2,500 RPM - with pressures shown in PSI and bar*Includes 6' of hose, enough length to test from driver's seat
-
Product
- RS-232 to Current Loop Converter
Model 65A
-
FEATURES: Active/Passive Loops; 20 or 60 mA. Operation; DC To 19.2 KBPS; Half/Full Duplex; Optically Isolated; DTE/DCE Selectable. The Model 65A is a small, versatile, RS-232 to Current Loop Converters for use with teletypes or computers providing local terminal input via a 20mA. (or 60 ma.) current loop. The Model 65 includes a wall mounted transformer and internal power supply circuitry.
-
Product
Push Back Probes (VF3) VF383B0001G15
1005124
-
The Push Back Probes (VF3) VF383B0001G15 is designed for optimal performance in applications requiring precise measurements and reliability under extreme temperatures ranging from -45°C to +100°C. With a pitch of 3.00 mm (118 mil), these probes ensure accurate connections with minimal resistance, featuring a typical contact resistance of only 30 mOhm. Engineered with a robust preload of 300 cN and a maximum travel of 5.50 mm, these probes facilitate effective and reliable contact under varying conditions while maintaining a pointing accuracy of +/- 0.10 mm, making them an ideal choice for sophisticated electronic assemblies.
-
Product
Push Back Probes (VF4) VF416B180G15
1005148
-
The Push Back Probes (VF4) VF416B180G15, with order code 1005148, is engineered for high precision applications, making it an essential tool in various electronic testing environments. Designed as a basic contact probe, its robust construction allows for continuous operation under varying temperatures, capable of enduring extremes from -45°C to +100°C. With a precise pitch of 4.00 mm, it guarantees minimal contact resistance at just 30 mOhm, enabling reliable electrical performance during testing.
-
Product
Push Back Probe (VF3) VF317B180G10
1007660
-
The Push Back Probes (VF3) model VF317B180G10 is essential for applications requiring precision measurement and connection. Built with a basic contact probe design, it operates effectively within a temperature range of -45°C to +100°C, making it versatile for various environmental conditions. The probe features a pitch of 3.00 mm and is capable of continuous current handling up to 8.00 A. With typical contact resistance measuring just 30.00 mOhm, the VF3 ensures reliable performance in applications where conductivity accuracy is paramount.
-
Product
Push Back Probes (VF4) VF483B0001G10
1005204
-
The Push Back Probes (VF4) VF483B0001G10, also known by the order code 1005204, is a high-performance basic contact probe designed to meet the rigorous demands of various applications. With a pitch of 4.00 mm and capable of operating across a wide temperature range from -45°C to +100°C, these probes are perfect for environments that require reliability at extreme thermal conditions. Their design incorporates advanced materials, specifically beryllium copper for the plunger and gold plating that ensures minimal contact resistance, which typically stands at around 30 mOhm. This makes the probes exceptionally reliable for high-power applications where electrical integrity is paramount.
-
Product
Closed Loop Hall Effect Current Sensors/Transducers
-
ChenYang Technologies GmbH & Co. KG
This Hall Effect current sensor is based on closed loop compensating principle and can be used for measurement of DC and AC current, pulse currents etc. The output of the transducer reflects the real wave of the current carrying conductor
-
Product
Push Back Probes (VF4) VF483B0010G20
1011473
-
The Push Back Probes (VF4) VF483B0010G20, also known as Basic Contact Probes, are essential tools designed for precise applications in various electronic setups. Engineered with a pitch of 4.00 mm (157 mil), these probes function effectively across a temperature range of -45°C to +100°C, making them suitable for a wide array of environments and complex tasks. The probes feature a robust design with a continuous current capacity of 10.00 A and a typical contact resistance of just 30 mOhm, ensuring reliable electrical connectivity and performance during usage.
-
Product
Push Back Probes (VF3) VF306B270G15
1005906
-
The Push Back Probes (VF3) VF306B270G15, with order code 1005906, are engineered to meet stringent standards for high performance in various applications. These basic contact probes are designed with a minimal pitch of just 3.00 mm (118 mil), allowing for precise measurements and optimal functionality in tight spaces. Capable of operating within a temperature range of -45°C to +100°C, these probes are versatile enough for diverse environments, ensuring reliability in challenging conditions.
-
Product
Push Back Probes (VF3) VF305B220G10
1007431
-
The Push Back Probes (VF3) VF305B220G10 is an advanced contact probe specifically designed for reliable performance in a variety of demanding environments. With a pitch of 3.00 mm and a temperature range of -45°C to +100°C, this product ensures precision and durability in electrical testing. The basic robust design allows for a continuous current handling capacity of 8.00 A, while maintaining a typical contact resistance of just 30.00 mOhm, making it an ideal choice for applications requiring consistent electrical conductivity.
-
Product
Mini Back Probes/Wire Piercers
618
-
*Great for backprobing weather pack style connectors used with numerous automotive sensors *Also very handy for piercing and tapping readings on smaller gauge wires - using the included probe adapters *Works with most Test Lead Kits in the field - with standard 4mm banana plug test lead *Set includes four probes - red, black, green, yellow Test probes 21 mm length
-
Product
Single Loop Controller
1166
-
The 1166 is a powerful, single loop profile controller for complex processes. It offers profiling capability with 4 programs each of 16 free format segments making it a leader in its class.
-
Product
Automotive Back Probe Pins
142-5
-
Flexible 1.5 inch silicon pins provide easy back probing connections for DMM and Scope measurements
-
Product
Push Back Probes (VF3) VF383B0005G15
1005899
-
The Push Back Probes (VF3) VF383B0005G15, specifically coded as 1005899, is designed for precision and reliability in demanding applications. This basic contact probe showcases an operational temperature range of -45°C to +100°C, making it suitable for various environments. Its continuous current capacity of 8.00 A and a typical contact resistance of just 30.00 mOhm ensures efficient performance while maintaining superior electrical conductivity.
