Product

Cable

RCONQPMC-1

-

Abaco Systems Inc

RCONQPMC-1 - Abaco Systems Inc

RRCONQPMC-1 - Transitions from a SCSI-68 pin connector to two CJ70 Twinax, 3 lug, 1553 cable jack ends and one D-Sub 50 pin connector for additional I/O.

Product

TCS Comfort

-

Maschinenbau Haldenwang GmbH & Co. KG.

Maschinenbau Haldenwang GmbH & Co. KG.

Trip distance / tachograph meter integrated into the brake tester (only in conjunction with PC)Electronic control unit TCS shockproof (workshop-oriented) aluminum housing with connection D-Sub 25p / D-Sub 9pEntire operation via integrated time and data display, and your existing PC (OS: Windows).Complete measurement and programming of the tachograph types 1311, 1314, 1318, 8400, FTCO 1319 MTCO 1324, TVI 2400, SE 5000, EFAs, SmarTach, DTCO 1381 incl. Integrated dial measurementLCD 4 rows, 16 digits; backlit with an integrated smart card readerMobile and / or stationary usable instrument; used stationary as integrated into the brake tester and the computer; optionally a road measurement is possible.Expression of complete test reportData storage for customer and vehicle datamultilingualism

Product

PCI Digital I/O Boards

PCI-P16C16

-

ICP DAS USA, Inc.

PCI-P16C16 - ICP DAS USA, Inc.

16 Channel Isolated Digital Input, 16 Channel Open-Collector Output Board. Includes CA-4037W cable and two CA-4002 D-Sub connectors

Product

PCI Daughter Boards

DB-24SSR/D/DIN (DB-24SSR/D with DIN-Rail Mounting)

-

ICP DAS USA, Inc.

DB-24SSR/D/DIN (DB-24SSR/D with DIN-Rail Mounting) - ICP DAS USA, Inc.

The DB-24SSR/DB-24SSRDC includes 24 normally open, or form A, solid-state relays The board interface to filed logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages. The user can use the DB-24SSR/DB-24SSRDC to switch high voltage load, up to 240 VAC/50 VDC and up to 4 A. The relay is energized by applying a 5-voltage signal to the appropriate relay channel on the 50-pin header or 37-pin D-sub connector. Twenty-four enunciator LEDs, one for each relay, light when their associated relay is activated. Because there is a D-sub 37-pin connector on the board, the user may use it to interface to any TTL output board. In other words, the user may use it as a general purpose solid state relay output board.

Product

PCI Daughter Boards

DB-24PR/12/DIN (with DIN-Rail mounting kit)

-

ICP DAS USA, Inc.

DB-24PR/12/DIN (with DIN-Rail mounting kit) - ICP DAS USA, Inc.

The DB-24R consists of 24 form C, electromechanical relays for efficient switching of load by programmed control. The contact of each relay can control a 0.5 A /110 V load or 1A / 24VDC. The relay is energized by applying a 5 voltage signal to the appropriate relay channel on the 50-pin Opto-22 compatible connector or D-Sub 37 connector . Twenty-four enunciator LEDs, one for each relay, light when their associated relay is activated . This board needs a +12VDC or +24VDC external power supply to avoid overloading your PC’s power supply.

Product

PCI Digital I/O Boards

PCI-P16POR16

-

ICP DAS USA, Inc.

PCI-P16POR16 - ICP DAS USA, Inc.

16 Channel Isolated Digital Input, 16 Channel PhotoMos Relay Output. Includes CA-4037W cable and two CA-4002 D-Sub connectors

Product

SP5T RF Pin Diode Switches To 12 GHz

-

Pulsar Microwave Corporation

Pulsar Microwave Corporation

Pulsar Microwave's 5-way RF switches cover bands from 300 MHz to 12 GHz in both absorptive and reflective configuration. These SP5T switches have a rating of 200 mW maximum input power and a switching time of 100 ns. They are specified with a minimum isolation of 60 dB and most models maintain a VSWR of 1.6:1 or better on all ports. The SP5T switches are driven by TTL logic control circuitry and require both positive and negative 5-volt supplies for operation. A 9-pin D-SUB connector provides the interface for the power and logic voltages.

Product

PCI Daughter Boards

DB-24PR/24 (24V Power Relay Board)

-

ICP DAS USA, Inc.

DB-24PR/24 (24V Power Relay Board) - ICP DAS USA, Inc.

The DB-24R consists of 24 form C, electromechanical relays for efficient switching of load by programmed control. The contact of each relay can control a 0.5 A /110 V load or 1A / 24VDC. The relay is energized by applying a 5 voltage signal to the appropriate relay channel on the 50-pin Opto-22 compatible connector or D-Sub 37 connector . Twenty-four enunciator LEDs, one for each relay, light when their associated relay is activated . This board needs a +12VDC or +24VDC external power supply to avoid overloading your PC’s power supply.

Product

IBM PC-XT, Vectorbord Plugbord

4613-3

-

VECTOR Electronics and Technology, Inc.

4613-3 - VECTOR Electronics and Technology, Inc.

62 contacts (31 each side) on 0.100" centers. Pad per hole. Voltage and ground buses around board perimeter. I/O mounting area for 37-pin D-sub and ribbon cable connectors. Mounting bracket and hardware kit included (P/N HD36B).

Product

PCI 24-Bit Digital I/O Cards

PCI-DIO-24D/H

-

Acces I/O Products, Inc.

PCI-DIO-24D/H - Acces I/O Products, Inc.

These cards are 24-bit parallel, digital input/output cards designed for use in PCI-Bus computers. The difference between the models is that I/O connections to PCI-DIO24D are via a standard 37-pin D-sub connector while I/O connections to PCI-DIO24H are via a 50-pin connector. The cards are 4.80 inches long (122 mm) and may be installed in any 5V PCI-bus slot in IBM and compatible personal computers.

Product

SP16T RF Pin Diode Switches To 10 GHz

-

Pulsar Microwave Corporation

Pulsar Microwave Corporation

Pulsar Microwave's 16-way switches cover 500 MHz to 10 GHz in single pole, 16-throw configuration. Maximum input power is 200 mW and switching time is 100 ns. SMA female connectors are standard. A 15-pin D-SUB male connector makes the internal connections to the power, ground and logic circuitry. Switching control is TTL with the option of line drivers and decoders.

Product

PXI Switching Instrumentation

-

Marvin Test Solutions, Inc.

Marvin Test Solutions, Inc.

Marvin Test Solutions’ switch card portfolio includes matrix, multiplexer, and RF multiplexer configurations. 3U and 6U PXI switch cards feature easy to use, reliable, and integration-friendly D-sub style interface connectors – a feature unique to Marvin Test Solutions PXI switch cards. GENASYS switch cards are compatible with MTS’s family of GENASYS Switching and Switching/Digital Subsystems, featuring integrated MAC Panel SCOUT receivers.

Product

CB-37F-HVD, 37-pin ScrewTerminal Blk, UL rec.150V CAT II, Din Rail

779491-01

-

NI

779491-01 - NI

37-Pin Female D-SUB to 37-Pin Female Screw Terminal, High Voltage Horizontal DIN Rail Terminal Block - The CB-37F-HVD features screw terminal connectivity for up to 37 I/O signals, 12 to 30 AWG. It has a female 37-pin D-SUB connector for connectivity to C Series I/O Modules and … data acquisition devices. The CB-37F-VHD is UL recognized. You can use the CB-37F-VHD with low-voltage or high-voltage products up to 150 V.