Product

Combination Exhaust Tester for Petrol- and Diesel- Powered Vehicles with Innovative Condensate Separation

MET 6.3 | VP 135213

-

Maschinenbau Haldenwang GmbH & Co. KG.

MET 6.3 | VP 135213 - Maschinenbau Haldenwang GmbH & Co. KG.

The combination tester is designed for the measurement of petrol- and diesel-powered vehicles. The MET 6.3 stands out for its innovative condensate separation thanks to an active water separator. In addition, low weight, compact design and short warm-up time ensure easy handling. Part of the equipment is a 2 m (optional 4 m) long probe for both engine types.

Product

Fluxgate Probes

-

Hirst Magnetic Instruments Ltd

Hirst Magnetic Instruments Ltd

Fluxgate Probe is a high sensitivity probe designed to measure low magnetic fields.

Product

CO2 Concentration Transmitter

T5241

-

COMET SYSTEM, s.r.o.

T5241 - COMET SYSTEM, s.r.o.

CO2 concentration transmitter with 0-10V output is built in a durable watertight case. Output range is user adjustable. Large dual line LCD is an advantage. Display is possible to switch off. The device is supplied with CO2 probe with 1m cable. Cable lengths 2, 4 or 10 meters available optionally.

Product

Oxygen Analyzer

DT3000

-

Datatest Inc

DT3000 - Datatest Inc

The Datatest Model DT3000 is a Zirconia sensor, microprocessor based, oxygen analyzer. The DT3000 comes with probe configurations for temperatures up to 3200F. The microprocessor based controller provides long-term stability and reliability, plus optional features for controlling back purge, calibration gas injection, and self-calibration. 4 - 20 mA output and Modbus RTU serial port are standard. The DT3000 is available in either a NEMA 4 wall mount or panel mount configuration.

Product

Needle Microprobe

MT-26/6HT

-

Physitemp Instruments

MT-26/6HT - Physitemp Instruments

Fast-response 26 gauge needle probe, (needle length is 6 cm) for instant readings in tissue, semisolids, liquids. Also for very small specimens, powders and materials. Needle tip is sealed to ensure only stainless steel contacts specimen. Max. temp. 200°C. 5 ft. lead. Smallest microprobes give fastest reading. Short probes are easier to insert and last longer. Type #'s indicate needle gauge and needle length in cm.

Product

Inductive Tone and Probe Cable Locator Kit

72-8500

-

Tenma

72-8500 - Tenma

This tone & probe set is a basic necessity for anyone running data, voice or any other low voltage cable. It is also suitable for tracing alarm, coax or speaker cables which are already installed.

Product

13 GHz Differential Probe with ProLink Interface

DH13-PL

-

Teledyne LeCroy

DH13-PL - Teledyne LeCroy

Teledyne LeCroy’s DH series 8 to 30 GHz differential probes offer the combination of bandwidth, input range and offset capability to address any high-speed probing requirement from debugging serial data interfaces to validating DDR memory systems. DH series probes provide superior loading characteristics and are calibrated with a custom “fine-tuned” frequency response. The ultra-low loading and flat frequency response ensure accurate measurements.

Product

Wafer Testing

Trio Vertical

-

Nidec SV Probe Pte. Ltd.

Trio Vertical - Nidec SV Probe Pte. Ltd.

SV TCL's TrioTM is a reliable solution for advanced wafer testing challenges, specifically full array and parallel probing. We offer a complete line of vertical probe card products, each designed for your unique application.

Product

Premium Wireless Vacuum Gauge Probe for use with HUB8 or HUB6

WVG2

-

UEi Test & Measurement Instruments

WVG2 - UEi Test & Measurement Instruments

Premium Wireless Vacuum Gauge Probe

Product

Linear Testfixture (2 pcs. Cassette Included), UTT 105 x 170 mm (2pcs)

MG-05

-

MG Products

MG-05 - MG Products

FEATURES• Linear click system with ball bearings, using gas springs• 10 mm ESD-proof top cover with aluminium reinforcement bars• Steel base cabinet with detachable aluminium back and bottom panels• Detachable interchangeable case system with an 8 mm spring loaded probe protection cover• Base cabinet fitted with a telescopic guide rail and catchTECHNICAL SPECIFICATIONS• Max. number of probes (1000N) 650 units for each cassette• Max. PCB height: 60 mm• Linear travel: 12 mm• Max UUT: 105 x 170 mm (wxd) each cassette• Outer dimensions: 550 x 400 x 50 x 140 mm (wxdxh1xh2)• Designed for 2 pieces changeable cassette

Product

PCI Express Card Slot Interposer

PCIE850

-

Silicon Control Inc.

PCIE850 - Silicon Control Inc.

The PCIE850 provides a complete test and debug solution for PCI Express Bus. Interposers and probes connect to the PCIE850 providing access to PCI Card, AMX, XMC and VPX systems.

Product

Air Temperature and Relative Humidity Sensors

-

Campbell Scientific, Inc.

Campbell Scientific, Inc.

Air temperature and relative humidity probes typically consist of two separate sensors packaged in the same housing. Often relative humidity is measured with a capacitive RH sensor, while air temperature is measured by a PRT.

Product

Starter Probe Station

C Series

-

EverBeing Int'l Corp

C Series - EverBeing Int'l Corp

Contains fundamental features to probing. C series lets you kick off your experiments and is an entry level machine designed for ease of use while allowing you to get accurate, reliable results.

Product

CIE Colorimeter Probe

K-1

-

Klein Instruments Corp

K-1 - Klein Instruments Corp

The Klein K-1 tri-stimulus CIE Colorimeter Probe is designed to be the best colorimeter in sensitivity, stability and speed. It attaches directly to a pc's serial com port (RS-232), and runs with the companion pc program. Whether a desktop or a laptop is used, the Klein measurement application is in control and many additional features are available.

Product

Strength Meter

NOVOTEST IPSM-U+T+D (Pulse Velocity Tester)

-

NovoTest

NOVOTEST IPSM-U+T+D (Pulse Velocity Tester) - NovoTest

The pulse velocity tester IPSM-U+T+D allows to measure the strength and homogeneity of the concrete, bricks and other materials under the composition and surface sounding in products and designs for construction projects, inspection of buildings and structures, according to ASTM C597-16 (Standard Test Method for Pulse Velocity Through Concrete).  Has the determining of the depth of cracks by the surface sounding probe function and also flaw detection mode (A-scan).

Product

A C DIELECTRIC STRENGTH TESTERS ( HIPOTS )

AVC-25V

-

Criterion Instruments Limited

AVC-25V - Criterion Instruments Limited

A C DIELECTRIC STRENGTH TESTERS ( HIPOTS ). Two high-voltage leads, one c/w a clip and one c/w a retractable probe. Each is 2 meters (6 ft) long.

Product

Fixture Customizing Probes

-

Equip-Test Kft.

Equip-Test Kft.

*100% ESD Grounding  *Sensor Plate Probes *Fixture Verification

Product

Temperature and Humidity Probe

T3311

-

COMET SYSTEM, s.r.o.

T3311 - COMET SYSTEM, s.r.o.

Built-in relative humidity, temperature sensors. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy.

Product

Test & Burn-In Socket for Devices up to 13mm Square

CSP/MicroBGA

-

Aries

CSP/MicroBGA - Aries

Test & Burn-In Socket. Socket is easily mounted and removed to & from the BIB due to solderless pressure mount compression spring probes which, are accurately located by two molded plastic alignment pins and mounted with four stainless steel screws. Standard molded socket format can accommodate any device package of 13mm or smaller, by using machined (for small quantities) or custom molded (for large quantities) pressure pads and interposers.

Product

Active Air Speed Transmitters

HD2903T / HD29V3T

-

Senseca

HD2903T / HD29V3T - Senseca

Active air speed transmitters for ducts. Air speed, air speed and temperature, air speed, temperature and relative humidity. Analog output 4…20mA or 0…10VDC. Several Probes type lenghts available.