Product

pH-Meters

-

PCE Instruments

PCE Instruments

Test soil pH, water pH, food pH and more quickly, easily and accurately with a digital pH Meter / pH Tester from PCE Instruments. Whether you’re looking for a compact, pocket, portable, handheld or tabletop pH Meter / pH Tester, you will find the best pH Meter / pH Tester for your application here. PCE Instruments also offers optional accessories such as pH Meter / pH Tester certified calibration certificates, oxygen probes and electrode storage solutions.

Product

Micro probes 1 MHz up to 1 GHz

MFA 02 set

-

Langer EMV-Technik GmbH

MFA 02 set - Langer EMV-Technik GmbH

The two in the set included micro probes are used to measure low-frequency magnetic fields up to 1 GHz, e.g. at signal conductors (150µm), SMD componets (0603-0201) or IC pins. The MFA micro probes are guided by hand. An amplifier stage is integrated into the probe head. The amplifier stage (9V, 100mA) is powered via the BT 706 Bias tee. It has an impedance of 50 Ohm. The micro probes are connected via the Bias tee to a spectrum analyzer or an oscilloscope. The MFA 02 set delivery of Langer EMV-Technik GmbH includes correction lines. With the help of the correction lines the probe output voltage is converted either into the respective magnetic field or to the current which is running through the conductor.

Product

Efficient And Effective Physical Layer (PHY) Testing Of 10/100/1000Base-T Interfaces

-

Sifos Technologies, Inc.

Sifos Technologies, Inc.

Explore Sifos Technologies’ highly unique, plug’n play 10/100/1000Base-T Ethernet Physical Layer Testing Solutions.  Cost Effective and Comprehensive PHY Testing without Scopes, Fixtures, Probes, and Test Signals.

Product

Immersion Probe

TP472I.O

-

Senseca

TP472I.O - Senseca

Immersion probe with SICRAM module, Pt100 sensor.

Product

Temperature Transmitter

T4111

-

COMET SYSTEM, s.r.o.

T4111 - COMET SYSTEM, s.r.o.

Transducer is designed for temperature measurement at C or F by means of an externaltemperature probe with Pt1000 sensor. Measured temperature is converted to linearized unified signal 4-20 mA. Measured values are displayed on LCD display. It is possible to switch OFF theLCD at all. Current loop has two-wire connection and requires power from evaluation device.

Product

K Thermocouple Surface Probe

TP772

-

Senseca

TP772 - Senseca

Surface thermocouple Type "K" probe. °C max: 400. Response time: 3 s.

Product

IEC61032 Jointed Finger Probe

CX-2B

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-2B - Shenzhen Chuangxin Instruments Co., Ltd.

Jointed Finger Probe This is the "international" test finger required by most IEC, EN and CSA standards, in addition to many UL standards.

Product

RF Near Field Scanner

-

TEM Consulting, LP

TEM Consulting, LP

The TEM Consulting near field scanner is a high precisions positioner that supports the precise movement of field probes. Using our scanning positioner field maps of planes and volumes can be developed to assist engineers in antenna design, analyzing and solving EMC problems and mapping signal intensity.

Product

CAM/GATE Test Kits

Series 45

-

Semco Machine Corp.

Series 45 - Semco Machine Corp.

The CG Series 45 CAM/GATE linear over clamp kits utilize the same patented “Z” axis motion as our CAM/TRAC® Series products offering precise Z axis linear motion when testing higher point count and finer pitch test centers. By using the Z axis motion, side load of the test probes is minimized thus increasing probe life and performance. The latch assembly engages and disengages when actuating the clamping assembly. The CAM/GATE utilizes a cam roller system for precision guiding and smooth operation and 1.00” push plate movement. The gate assembly is movable to three different positions which allows for the versatility of top side probing, or relocating the frame assembly for PCA’s the have tall components

Product

Programmable ProBus Current Adapter

CA10

-

Teledyne LeCroy

CA10 - Teledyne LeCroy

The CA10 is a programmable and customizable interface device that seamlessly incorporates third party current transducers/transformers with Teledyne LeCroy oscilloscopes or motor drive analyzers. It allows the third party device to be recognized and operate as if it were a Teledyne LeCroy probe.

Product

6 Sided Bed of Nails Testers

BoxProber Family

-

Test Electronics

BoxProber Family - Test Electronics

6 sided Bed of Nails circuit board test fixture. Probes top bottom and all 4 sides. Central camming mechanism pull plates inward. Mechanically or electrically actuated options. Designed primarily for testing products in plastics. Side access electrically probes outside panel connectors. The unit will also optically read LEDs and key segments off LCD displays. Solenoids will press buttons and servos will turn selector switches. DC motors are used to adjust multiple turn potentiometers. Microphone will detect audio output tones. Top and bottom of circuit boards can also be probed if removable access panels are available. This unit will also probe all 6 sides of a circuit board. This is typically utilized in applications where connector testing is required.

Product

Service Testers

-

Bierer & Associates, Inc

Bierer & Associates, Inc

Service tester with receiver probe, laser pyrometer, alligator clip cable, 10 inch handle, manual and standard bag.

Product

Shaft Voltage Tester™ Digital Oscilloscope

AEGIS®

-

Electro Static Technology

AEGIS® - Electro Static Technology

Digital Oscilloscope and Multimeter with Conductive Microfiber Probe Tips. Is your motor safe from destructive shaft voltages? For the first time you can get all of the tools to find out in one place. The AEGIS® Shaft Voltage Tester™ Digital Oscilloscope bundle includes the AEGIS-OSC-9100 100 MHz digital osciloscope, shaft voltage probe tips, and a shaft grounding simulator. Armed with these tools, you can quickly and easily find whether your motors are at risk of premature bearing failure due to VFD-produced bearing currents.

Product

Differential Probe

DP-16VF

-

PINTEK Electronics

DP-16VF - PINTEK Electronics

*MAX. Input Voltage: ±8KV DC or 16KV p-p or AC 5.6KV rms*Bandwidth: DC-150MHz*Input Impedance 20MΩ // 5PF*X400, X4000 Attenuator*To Ground MAX. Voltage: 3.5KV CAT III*Output Impedance 50Ω

Product

External Temperature for 3-wire PT1000 Probe

TGP-4204

-

Gemini Data Loggers Ltd.

TGP-4204 - Gemini Data Loggers Ltd.

PT1000 probes are available with this logger that will record down to -200C, making them suitable for cryogenic applications. The probes are of 3-wire construction and use class A elements, making them more accurate than their 2-wire predecessors.

Product

Local Discomfort Temperature Probe

TP3227K

-

Senseca

TP3227K - Senseca

Temperature probe composed of 2 independent probes, Pt100 sensor used for measuring local discomfort due to vertical thermal gradient.

Product

Vacuum Assist

1029

-

TESCO

1029 - TESCO

TESCO’s Vacuum Assist actively generates a vacuum that attaches your TESCO optical pickup or probe to the meter and allows hands-free use for the meter tech. No more wasted time during testing or communication work when the pickup or probe falls off.